From: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Date: Thu, 27 Nov 2025 13:17:50 +0100
Subject: leds: add "network" LED trigger (lan/wan/wlan)

LED trigger for network interfaces.

 - Aggregated per-family (lan/wan/wlan).
 - Family and flags are taken from device tree properties:
   - "family" : simple family string "lan" | "wan" | "wlan"
   - "mode"   : any combination of "link", "tx", "rx" flags
  Priority/combination:
   * If "mode" present: flags come from "mode" and take precedence.
     Family is taken from "family" if present, otherwise from the LED name.
   * If only "family" present: use its family and default flags = link+tx+rx.
   * If neither present: fall back to LED device name parsing.

 - Suffix "-online" is valid ONLY in the LED name (label),
   e.g. "green:wlan-online". It indicates the online variant but is applied
   only when DT "mode" is absent.

Behaviour:
 - wlan (normal): blink/solid driven by throughput table
 - lan/wan (normal): one-shot blink on TX/RX packet change
 - *-online variants: steady ON while any interface of the family has carrier

 Interfaces are auto-tracked by name match (lan0, wan1, wlan2, phy0, wl1,
 ath0, ra0...). Up to MAX_IFACES (16) interfaces per family

This trigger is intended for board/device authors and drivers to provide simple
network-activity LED behaviour without per-interface wiring in userspace.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
---
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -129,6 +129,15 @@ config LEDS_TRIGGER_NETDEV
 	  This allows LEDs to be controlled by network device activity.
 	  If unsure, say Y.
 
+config LEDS_TRIGGER_NETWORK
+	tristate "LED trigger for network interfaces"
+	depends on NET
+	help
+	  Per-family network LED trigger: aggregates lan/wan/wlan stats;
+	  family from DT 'family' or name; flags from DT 'mode';
+	  '-online' - online-only if mode absent.
+	  If unsure, say Y.
+
 config LEDS_TRIGGER_PATTERN
 	tristate "LED Pattern Trigger"
 	help
--- a/drivers/leds/trigger/Makefile
+++ b/drivers/leds/trigger/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= led
 obj-$(CONFIG_LEDS_TRIGGER_PATTERN)	+= ledtrig-pattern.o
 obj-$(CONFIG_LEDS_TRIGGER_TTY)		+= ledtrig-tty.o
 obj-$(CONFIG_LEDS_TRIGGER_INPUT_EVENTS)	+= ledtrig-input-events.o
+obj-$(CONFIG_LEDS_TRIGGER_NETWORK)	+= ledtrig-network.o