portugalfuturista/openwrt-pf
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 2
Portugal Futurista fork of OpenWrt — custom targets and PF router packages
70127 commits 2 branches 0 tags 282 MiB
C 65.7%
Makefile 20.3%
Shell 7.1%
Perl 2.3%
UnrealScript 1.9%
Other 2.5%
Find a file
Jonas Jelonek 4e7a9a7969
realtek: pcs: rtl931x: gate symErr success on actual link status 
symErr reads 0 both when the link is clean and when there's no signal
at all to decode errors from - the counter only increments when the
PCS is actively decoding something and finds a mismatch, so a dead
link and a healthy one are indistinguishable from symErr alone.
Confirmed on hardware: symErr read 0x0 while the port had no link.

Add rtpcs_931x_sds_10gr_link_up(), reading the same status bit as the
vendor SDK's _phy_rtl9310_linkSts_get() default case, and require it
alongside a low symErr count before declaring a calibration check
successful. A link that isn't actually up yet now keeps the retry
loop going instead of being misread as a clean, working link.

Also observed on hardware: the retry budget sometimes runs out while
symErr is still nonzero, but the link comes up and works fine anyway -
the count just hasn't fully settled within the budget. Since that's
not an actual problem, keep the final message at dev_dbg when
link_up is true; only warn when the link genuinely never came up.

Link: https://github.com/openwrt/openwrt/pull/24542
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
2026-08-04 09:51:29 +02:00
.devcontainer/ci-env
.github ixp4xx-microcode: use the linux-firmware images 2026-08-01 18:36:20 +02:00
.vscode editor: vscode: do not trim diff file trailing whitespace 2026-07-25 22:45:06 +02:00
config build: gate firmware image signing behind SIGN_FIRMWARE 2026-07-20 10:33:41 +02:00
include build: make GL.iNet metadata reproducible 2026-07-23 14:39:19 +02:00
LICENSES
package ath10k-ct: update to version 7.2 2026-08-04 02:37:19 +02:00
scripts projectsmirrors: remove GNOME mirrors mirror.csclub.uwaterloo.ca 2026-08-02 15:02:33 +02:00
target realtek: pcs: rtl931x: gate symErr success on actual link status 2026-08-04 09:51:29 +02:00
toolchain Revert "toolchain: drop $(REVISION) from GCC version" 2026-07-29 09:14:05 +02:00
tools tools: elfutils: fix uio header inclusion 2026-08-04 09:17:53 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
COPYING
feeds.conf.default feeds: revert to git.openwrt.org 2026-01-09 21:55:00 +01:00
Makefile
README.md prereq-build: bump python requirement to 3.8 2026-06-10 09:00:33 +02:00
rules.mk build: do not set CCACHE_COMPILERCHECK 2026-04-22 23:57:01 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.8+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0