portugalfuturista/openwrt-pf
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openwrt-pf/package/boot/uboot-rockchip/Makefile
Grische e54f0353c2
rockchip: add support for FriendlyARM NanoPi R2S Plus 
The NanoPi R2S Plus is a NanoPi R2S with on-board eMMC added. The device
tree (rk3328-nanopi-r2s-plus.dts) is already present in kernel 6.12, and
U-Boot support has been present since v2025.01, so neither a kernel DTS
backport nor a U-Boot patch is required.

Hardware
--------
Rockchip RK3328 (4x Cortex-A53, up to 1.4 GHz)
1GB DDR4 RAM
32GB eMMC 5.1
microSD slot (up to 128GB)
1x 1000 Base-T (native, RTL8211F via GMAC) - WAN
1x 1000 Base-T (USB 3.0, RTL8153B) - LAN
Optional M.2 SDIO Wi-Fi
2x USB 2.0 Type-A host
1x USB-C (5V power input, USB device for Maskrom update)
1x USB-C (onboard USB-to-UART debug console, 1500000 bps)
1x serial debug header / UART0 (3.3V TTL, 3-pin 2.54mm)
2 Buttons (GPIO key, Maskrom)
3 LEDs (SYS red, WAN green, LAN green)
DC 5V/2A power
Operating temperature 0 to 70 C

The MAC addresses are derived from the eMMC CID, so they are stable
regardless of whether the device boots from microSD or eMMC.

Installation
------------

On RK3328 the BootROM boots the eMMC before the microSD slot, so the
Maskrom button must be held to boot from microSD while stock firmware is
still on the eMMC.

How to boot from eMMC:

1. Write the uncompressed sysupgrade image to sdcard
2. Hold the "Mask" button while powering on the device
3. Wait until OpenWrt is fully booted
4. Copy the compressed .gz sysupgrade image to the machine's /tmp folder using scp
5. Run: gunzip -c /tmp/openwrt-...-friendlyarm_nanopi-r2s-plus-squashfs-sysupgrade.img.gz | dd of=/dev/mmcblk1 bs=4M conv=fsync
6. Power the device off, remove the sdcard and power it back on

Tested:
- microSD boot (via Maskrom button) and native eMMC boot
- Both Ethernet ports (RTL8211F WAN, RTL8153B LAN)
- eMMC-derived MAC addresses

Signed-off-by: Grische <github@grische.xyz>
Assisted-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/23854
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
2026-06-29 09:13:34 +02:00

517 lines
10 KiB
Makefile
Raw Blame History

#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_VERSION:=2026.01
PKG_RELEASE:=1
PKG_HASH:=b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54
PKG_MAINTAINER:=Sarah Maedel <openwrt@tbspace.de>
UBOOT_USE_BINMAN:=1
UBOOT_USE_INTREE_DTC:=1
include $(INCLUDE_DIR)/u-boot.mk
include $(INCLUDE_DIR)/package.mk
define U-Boot/Default
BUILD_TARGET:=rockchip
UENV:=default
HIDDEN:=1
endef
# RK3308 boards
define U-Boot/rk3308/Default
BUILD_SUBTARGET:=armv8
DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3308
ATF:=rk3308_bl31_v2.27.elf
TPL:=rk3308_ddr_589MHz_uart2_m1_v2.10.bin
endef
define U-Boot/rock-pi-s-rk3308
$(U-Boot/rk3308/Default)
DEPENDS+=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3308-tpl-rock-pi-s
TPL:=rk3308_ddr_589MHz_uart0_m0_v2.10.bin
NAME:=ROCK Pi S
BUILD_DEVICES:= \
radxa_rock-pi-s
endef
# RK3328 boards
define U-Boot/rk3328/Default
BUILD_SUBTARGET:=armv8
DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3328
ATF:=rk3328_bl31.elf
endef
define U-Boot/nanopi-r2c-rk3328
$(U-Boot/rk3328/Default)
NAME:=NanoPi R2C
BUILD_DEVICES:= \
friendlyarm_nanopi-r2c
endef
define U-Boot/nanopi-r2c-plus-rk3328
$(U-Boot/rk3328/Default)
NAME:=NanoPi R2C Plus
BUILD_DEVICES:= \
friendlyarm_nanopi-r2c-plus
endef
define U-Boot/nanopi-r2s-rk3328
$(U-Boot/rk3328/Default)
NAME:=NanoPi R2S
BUILD_DEVICES:= \
friendlyarm_nanopi-r2s
endef
define U-Boot/nanopi-r2s-plus-rk3328
$(U-Boot/rk3328/Default)
NAME:=NanoPi R2S Plus
BUILD_DEVICES:= \
friendlyarm_nanopi-r2s-plus
endef
define U-Boot/orangepi-r1-plus-rk3328
$(U-Boot/rk3328/Default)
NAME:=Orange Pi R1 Plus
BUILD_DEVICES:= \
xunlong_orangepi-r1-plus
endef
define U-Boot/orangepi-r1-plus-lts-rk3328
$(U-Boot/rk3328/Default)
NAME:=Orange Pi R1 Plus LTS
BUILD_DEVICES:= \
xunlong_orangepi-r1-plus-lts
endef
define U-Boot/roc-cc-rk3328
$(U-Boot/rk3328/Default)
NAME:=ROC-RK3328-CC
BUILD_DEVICES:= \
firefly_roc-rk3328-cc
endef
define U-Boot/rock64-rk3328
$(U-Boot/rk3328/Default)
NAME:=Rock64
BUILD_DEVICES:= \
pine64_rock64
endef
define U-Boot/rock-pi-e-rk3328
$(U-Boot/rk3328/Default)
NAME:=ROCK Pi E
BUILD_DEVICES:= \
radxa_rock-pi-e
endef
define U-Boot/rock-pi-e-v3-rk3328
$(U-Boot/rk3328/Default)
NAME:=ROCK Pi E v3.0
BUILD_DEVICES:= \
radxa_rock-pi-e-v3
endef
# RK3399 boards
define U-Boot/rk3399/Default
BUILD_SUBTARGET:=armv8
DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3399
ATF:=rk3399_bl31.elf
endef
define U-Boot/nanopc-t4-rk3399
$(U-Boot/rk3399/Default)
NAME:=NanoPC T4
BUILD_DEVICES:= \
friendlyarm_nanopc-t4
endef
define U-Boot/nanopi-r4s-rk3399
$(U-Boot/rk3399/Default)
NAME:=NanoPi R4S
BUILD_DEVICES:= \
friendlyarm_nanopi-r4s \
friendlyarm_nanopi-r4s-enterprise
endef
define U-Boot/rock-4c-plus-rk3399
$(U-Boot/rk3399/Default)
NAME:=ROCK 4C+
BUILD_DEVICES:= \
radxa_rock-4c-plus
endef
define U-Boot/rock-4se-rk3399
$(U-Boot/rk3399/Default)
NAME:=ROCK 4SE
BUILD_DEVICES:= \
radxa_rock-4se
endef
define U-Boot/rock-pi-4-rk3399
$(U-Boot/rk3399/Default)
NAME:=ROCK Pi 4
BUILD_DEVICES:= \
radxa_rock-pi-4a
endef
define U-Boot/rockpro64-rk3399
$(U-Boot/rk3399/Default)
NAME:=RockPro64
BUILD_DEVICES:= \
pine64_rockpro64
endef
# RK3528 boards
define U-Boot/rk3528/Default
BUILD_SUBTARGET:=armv8
DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3528
ATF:=rk3528_bl31_v1.20.elf
TPL:=rk3528_ddr_1056MHz_v1.11.bin
endef
define U-Boot/hinlink-h28k-rk3528
$(U-Boot/rk3528/Default)
NAME:=HINLINK H28K
BUILD_DEVICES:= \
hinlink_h28k
endef
define U-Boot/radxa-e20c-rk3528
$(U-Boot/rk3528/Default)
NAME:=E20C
BUILD_DEVICES:= \
radxa_e20c
endef
define U-Boot/rock-2-rk3528
$(U-Boot/rk3528/Default)
NAME:=ROCK 2A/2F
BUILD_DEVICES:= \
radxa_rock-2a \
radxa_rock-2f
endef
# RK3566 boards
define U-Boot/rk3566/Default
BUILD_SUBTARGET:=armv8
DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3566
ATF:=rk3568_bl31_v1.45.elf
TPL:=rk3566_ddr_1056MHz_v1.23.bin
endef
define U-Boot/nanopi-r3s-rk3566
$(U-Boot/rk3566/Default)
NAME:=NanoPi R3S
BUILD_DEVICES:= \
friendlyarm_nanopi-r3s
endef
define U-Boot/radxa-cm3-io-rk3566
$(U-Boot/rk3566/Default)
NAME:=CM3 IO
BUILD_DEVICES:= \
radxa_cm3-io
endef
define U-Boot/radxa-zero-3-rk3566
$(U-Boot/rk3566/Default)
NAME:=ZERO 3E/3W
BUILD_DEVICES:= \
radxa_zero-3e \
radxa_zero-3w
endef
define U-Boot/rock-3c-rk3566
$(U-Boot/rk3566/Default)
NAME:=ROCK 3C
BUILD_DEVICES:= \
radxa_rock-3c
endef
# RK3568 boards
define U-Boot/rk3568/Default
BUILD_SUBTARGET:=armv8
DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3568
ATF:=rk3568_bl31_v1.45.elf
TPL:=rk3568_ddr_1560MHz_v1.23.bin
endef
define U-Boot/bpi-r2-pro-rk3568
$(U-Boot/rk3568/Default)
NAME:=Bananapi-R2 Pro
BUILD_DEVICES:= \
sinovoip_bpi-r2-pro
endef
define U-Boot/easepi-r1-rk3568
$(U-Boot/rk3568/Default)
NAME:=LinkEase EasePi R1
BUILD_DEVICES:= \
linkease_easepi-r1
endef
define U-Boot/fastrhino-r66s-rk3568
$(U-Boot/rk3568/Default)
NAME:=FastRhino R66S
BUILD_DEVICES:= \
lunzn_fastrhino-r66s
endef
define U-Boot/hinlink-h66k-rk3568
$(U-Boot/rk3568/Default)
NAME:=HINLINK H66K
BUILD_DEVICES:= \
hinlink_h66k
endef
define U-Boot/hinlink-h68k-rk3568
$(U-Boot/rk3568/Default)
NAME:=HINLINK H68K
BUILD_DEVICES:= \
hinlink_h68k
endef
define U-Boot/nanopi-r5c-rk3568
$(U-Boot/rk3568/Default)
NAME:=NanoPi R5C
BUILD_DEVICES:= \
friendlyarm_nanopi-r5c
endef
define U-Boot/nanopi-r5s-rk3568
$(U-Boot/rk3568/Default)
NAME:=NanoPi R5S
BUILD_DEVICES:= \
friendlyarm_nanopi-r5s
endef
define U-Boot/radxa-e25-rk3568
$(U-Boot/rk3568/Default)
DEPENDS+=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3568-tpl-e25
TPL:=rk3568_ddr_1560MHz_uart2_m0_115200_v1.23.bin
NAME:=E25
BUILD_DEVICES:= \
radxa_e25
endef
define U-Boot/rock-3a-rk3568
$(U-Boot/rk3568/Default)
NAME:=ROCK 3A
BUILD_DEVICES:= \
radxa_rock-3a
endef
define U-Boot/rock-3b-rk3568
$(U-Boot/rk3568/Default)
NAME:=ROCK 3B
BUILD_DEVICES:= \
radxa_rock-3b
endef
# RK3576 boards
define U-Boot/rk3576/Default
BUILD_SUBTARGET:=armv8
DEPENDS:= \
+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3576 \
+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3576-tpl
ATF:=rk3576_bl31.elf
TPL:=rk3576_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin
endef
define U-Boot/generic-rk3576
$(U-Boot/rk3576/Default)
NAME:=Generic RK3576
BUILD_DEVICES:= \
friendlyarm_nanopi-r76s
endef
define U-Boot/nanopi-m5-rk3576
$(U-Boot/rk3576/Default)
NAME:=NanoPi M5
BUILD_DEVICES:= \
friendlyarm_nanopi-m5
endef
define U-Boot/rock-4d-rk3576
$(U-Boot/rk3576/Default)
NAME:=ROCK 4D
BUILD_DEVICES:= \
radxa_rock-4d
endef
# RK358x boards
define U-Boot/rk358x/Default
BUILD_SUBTARGET:=armv8
DEPENDS:= \
+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3588 \
+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3588-tpl
ATF:=rk3588_bl31.elf
TPL:=rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.19.bin
endef
define U-Boot/generic-rk3588
$(U-Boot/rk358x/Default)
NAME:=Generic RK358x board
BUILD_DEVICES:= \
radxa_e52c \
radxa_rock-5b-plus \
radxa_rock-5t
endef
# RK3588 boards
define U-Boot/nanopc-t6-rk3588
$(U-Boot/rk358x/Default)
NAME:=NanoPC T6
BUILD_DEVICES:= \
friendlyarm_nanopc-t6
endef
define U-Boot/rock-5-itx-rk3588
$(U-Boot/rk358x/Default)
NAME:=ROCK 5 ITX/ITX+
BUILD_DEVICES:= \
radxa_rock-5-itx
endef
define U-Boot/rock5b-rk3588
$(U-Boot/rk358x/Default)
NAME:=ROCK 5B
BUILD_DEVICES:= \
radxa_rock-5b
endef
define U-Boot/sige7-rk3588
$(U-Boot/rk358x/Default)
NAME:=Sige7
BUILD_DEVICES:= \
armsom_sige7
endef
# RK3588S boards
define U-Boot/nanopi-r6c-rk3588s
$(U-Boot/rk358x/Default)
NAME:=NanoPi R6C
BUILD_DEVICES:= \
friendlyarm_nanopi-r6c
endef
define U-Boot/nanopi-r6s-rk3588s
$(U-Boot/rk358x/Default)
NAME:=NanoPi R6S
BUILD_DEVICES:= \
friendlyarm_nanopi-r6s
endef
define U-Boot/rock5a-rk3588s
$(U-Boot/rk358x/Default)
NAME:=ROCK 5A
BUILD_DEVICES:= \
radxa_rock-5a
endef
define U-Boot/rock-5c-rk3588s
$(U-Boot/rk358x/Default)
NAME:=ROCK 5C/5C Lite
BUILD_DEVICES:= \
radxa_rock-5c
endef
UBOOT_TARGETS := \
nanopc-t4-rk3399 \
nanopi-r4s-rk3399 \
rock-4c-plus-rk3399 \
rock-4se-rk3399 \
rock-pi-4-rk3399 \
rockpro64-rk3399 \
rock-pi-s-rk3308 \
nanopi-r2c-rk3328 \
nanopi-r2c-plus-rk3328 \
nanopi-r2s-rk3328 \
nanopi-r2s-plus-rk3328 \
orangepi-r1-plus-rk3328 \
orangepi-r1-plus-lts-rk3328 \
roc-cc-rk3328 \
rock64-rk3328 \
rock-pi-e-rk3328 \
rock-pi-e-v3-rk3328 \
hinlink-h28k-rk3528 \
radxa-e20c-rk3528 \
rock-2-rk3528 \
nanopi-r3s-rk3566 \
radxa-cm3-io-rk3566 \
radxa-zero-3-rk3566 \
rock-3c-rk3566 \
bpi-r2-pro-rk3568 \
easepi-r1-rk3568 \
fastrhino-r66s-rk3568 \
hinlink-h66k-rk3568 \
hinlink-h68k-rk3568 \
nanopi-r5c-rk3568 \
nanopi-r5s-rk3568 \
radxa-e25-rk3568 \
rock-3a-rk3568 \
rock-3b-rk3568 \
generic-rk3576 \
nanopi-m5-rk3576 \
rock-4d-rk3576 \
generic-rk3588 \
nanopc-t6-rk3588 \
rock-5-itx-rk3588 \
rock5b-rk3588 \
sige7-rk3588 \
nanopi-r6c-rk3588s \
nanopi-r6s-rk3588s \
rock5a-rk3588s \
rock-5c-rk3588s
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
UBOOT_CUSTOMIZE_CONFIG := \
--disable TOOLS_MKEFICAPSULE \
--set-str MKIMAGE_DTC_PATH $(PKG_BUILD_DIR)/scripts/dtc/dtc
UBOOT_MAKE_FLAGS += \
BL31=$(STAGING_DIR_IMAGE)/$(ATF) \
$(if $(TPL),ROCKCHIP_TPL=$(STAGING_DIR_IMAGE)/$(TPL))
define Build/Configure
$(call Build/Configure/U-Boot)
ifneq ($(filter %rk3576,$(BUILD_VARIANT)),)
$(TARGET_CC) -nostdlib -ffreestanding -Os -S -o $(PKG_BUILD_DIR)/rk3576-boost.S $(PKG_BUILD_DIR)/rk3576-boost.c
$(TARGET_CROSS)as -o $(PKG_BUILD_DIR)/rk3576-boost.o $(PKG_BUILD_DIR)/rk3576-boost.S
$(TARGET_CROSS)objcopy -O binary -j .text $(PKG_BUILD_DIR)/rk3576-boost.o $(PKG_BUILD_DIR)/rk3576-boost.bin
endif
endef
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/u-boot-rockchip.bin $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-u-boot-rockchip.bin
endef
define Package/u-boot/install/default
endef
$(eval $(call BuildPackage/U-Boot))
Reference in a new issue View git blame Copy permalink