bc3d4fa5b2
Add support for TSW202 PoE switch. This is an RTL8380 based switch
with two SFP slots, and 8 PoE 802.3af one every RJ-45 port.
The max budget is 240W.
The vendor firmware configures the PSE
with a per-port budget of 30.0W.
Specifications:
---------------
* SoC: Realtek RTL8380M
* Flash: 16 MiB SPI NOR W25Q80RV, 8Mb_Serial_Flash, low_power
* RAM: 128 MiB Winbond W631GG8NB 151
* Ethernet: 8x 10/100/1000 Mbps with PoE
2x SFP slots
* Buttons: 1 "Reset" button on front panel
* Power: 48V-54V DC barrel jack
* UART: 1 serial header with terminal on the back side.
With ground, rx, tx, and 3.3V
* PoE: 2 XS2184
* LED: 2 i2c SL74HC164
Works:
------
- (8) RJ-45 ethernet ports
- (2) SFP with ethernet or fiber
- Switch functions
TODO:
------
- LEDs are always on
- Power-over-Ethernet are always on
Install via web interface:
-------------------------
The openwrt firmware will not accept and flash the sysupgrade image.
It is recommended to flash with sysupgrade -n -f over ssh.
Dokumantation, Bootlogs, and Fotos can be found on
https://git.f2a.space/patrick/openwrt-24.10-tsw202/-/wikis/home
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Link: https://github.com/openwrt/openwrt/pull/21003
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
|
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||