This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target with test date (label on the packaging, not the
device) later than October 2017.
To discover whether you have the new version, open a console on the
stock web interface and run `dmesg | grep AR803`. New versions print
AR8035, v1 shows AR8032.
Specifications:
- AR9342 (rev 3) SoC @ 535 MHz
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- AR8035 switch
- 2T2R 5 GHz radio, 22 dBm
- 13 dBi built-in directional antenna
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via TFTP:
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-v2-squashfs-factory.bin
MAC addresses: stored on Flash, in the "art" partition.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Link: https://github.com/openwrt/openwrt/pull/23912
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
54e70703a0