e54f0353c2
The NanoPi R2S Plus is a NanoPi R2S with on-board eMMC added. The device tree (rk3328-nanopi-r2s-plus.dts) is already present in kernel 6.12, and U-Boot support has been present since v2025.01, so neither a kernel DTS backport nor a U-Boot patch is required. Hardware -------- Rockchip RK3328 (4x Cortex-A53, up to 1.4 GHz) 1GB DDR4 RAM 32GB eMMC 5.1 microSD slot (up to 128GB) 1x 1000 Base-T (native, RTL8211F via GMAC) - WAN 1x 1000 Base-T (USB 3.0, RTL8153B) - LAN Optional M.2 SDIO Wi-Fi 2x USB 2.0 Type-A host 1x USB-C (5V power input, USB device for Maskrom update) 1x USB-C (onboard USB-to-UART debug console, 1500000 bps) 1x serial debug header / UART0 (3.3V TTL, 3-pin 2.54mm) 2 Buttons (GPIO key, Maskrom) 3 LEDs (SYS red, WAN green, LAN green) DC 5V/2A power Operating temperature 0 to 70 C The MAC addresses are derived from the eMMC CID, so they are stable regardless of whether the device boots from microSD or eMMC. Installation ------------ On RK3328 the BootROM boots the eMMC before the microSD slot, so the Maskrom button must be held to boot from microSD while stock firmware is still on the eMMC. How to boot from eMMC: 1. Write the uncompressed sysupgrade image to sdcard 2. Hold the "Mask" button while powering on the device 3. Wait until OpenWrt is fully booted 4. Copy the compressed .gz sysupgrade image to the machine's /tmp folder using scp 5. Run: gunzip -c /tmp/openwrt-...-friendlyarm_nanopi-r2s-plus-squashfs-sysupgrade.img.gz | dd of=/dev/mmcblk1 bs=4M conv=fsync 6. Power the device off, remove the sdcard and power it back on Tested: - microSD boot (via Maskrom button) and native eMMC boot - Both Ethernet ports (RTL8211F WAN, RTL8153B LAN) - eMMC-derived MAC addresses Signed-off-by: Grische <github@grische.xyz> Assisted-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Link: https://github.com/openwrt/openwrt/pull/23854 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> |
||
|---|---|---|
| .devcontainer/ci-env | ||
| .github | ||
| .vscode | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.8+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0