abs_s=absolute value
abs=absolute value
abss=absolute and saturate
abssw=absolute and saturate of word
adc=add with carry
add_s=add
add=add
add1_s=add with left shift by 1 bits
add1=add with left shift by 1 bit
add2_s=add with left shift by 2 bits
add2=add with left shift by 2 bits
add3_s=add with left shift by 3 bits
add3=add with left shift by 3 bits
adds=add and saturate
addsdw=add and saturate dual word
and_s=logical and
and=logical and
asl_s=arithmetic shift left
asl=arithmetic shift left
asls=arithmetic shift left and saturate
asr_s=arithmetic shift right
asr=arithmetic shift right
asrs=arithmetic shift right and saturate
bbit0=branch if bit cleared to 0
bbit1=branch if bit set to 1
bcc_s=branch if condition true
bcc=branch if condition true
bclr_s=clear specified bit (to 0)
bclr=clear specified bit (to 0)
bic_s=bit-wise inverted and
bic=bit-wise inverted and
bl_s=branch and link
blcc=branch and link
bmsk_s=bit mask
bmsk=bit mask
brcc_s=branch on compare
brcc=branch on compare
brk_s=break (halt) processor
brk=break (halt) processor
bset_s=set specified bit (to 1)
bset=set specified bit (to 1)
btst_s=test value of specified bit
btst=test value of specified bit
bxor=bit xor
cmp_s=compare
cmp=compare
divaw=division assist
ex=atomic exchange
ext_s=unsigned extend
ext=unsigned extend
flag=write to status register
jcc_s=jump
jcc=jump
jl_s=jump and link
jlcc=jump and link
ld_s=load from memory
ld=load from memory
lpcc=loop (zero-overhead loops)
lr=load from auxiliary memory
lsr_s=logical shift right
lsr=logical shift left
max=return maximum
min=return minimum
mov_s=move (copy) to register
mov=move (copy) to register
mpy=32 x 32 signed multiply (low)
mpyh=32 x 32 signed multiply (high)
mpyhu=32 x 32 unsigned multiply (high)
mpyu=32 x 32 unsigned multiply (low)
mul64_s=32 x 32 multiply
mul64=32 x 32 signed multiply
mulu64=32 x 32 unsigned multiply
neg_s=negate
neg=negate
negs=negate and saturate
negsw=negate and saturate of word
nop_s=no operation
norm=normalize to 32 bits
normw=normalize to 16 bits
not_s=logical bit inversion
not=logical bit inversion
or_s=logical or
or=logical or
pop_s=restore register value from stack
prefetch=prefetch from memory
push_s=store register value on stack
rcmp=reverse compare
rlc=rotate left through carry
rnd16=round to word
ror=rotate right
rrc=rotate right through carry
rsub=reverse subtraction
rtie=return from interrupt/exception
sat16=saturate to word
sbc=subtract with carry
sex_s=signed extend
sex=signed extend
sleep=put processor in sleep mode
sr=store to auxiliary memory
st_s=store to memory
st=store to memory
sub_s=subtract
sub=subtract
sub1=subtract with left shift by 1 bit
sub2=subtract with left shift by 2 bits
sub3=subtract with left shift by 3 bits
subs=subtract and saturate
subsdw=subtract and saturate dual word
swap=swap 16 x 16
swi=software interrupt
sync=synchronize
trap_s=raise exception
trap0=raise exception with param. 0
tst_s=test
tst=test
unimp_s=unimplemented instruction
xor_s=logical exclusive-or
xor=logical exclusive-or