In x86, EPT and normal mappings have different cache attributes. This
commit adds an enum for the EPT attributes.
Signed-off-by: Chris Guikema <chris.guikema@dornerworks.com>
Today the file autoconf.h is created by the CMake build system and thus
HAVE_AUTOCONF is always defined. Time to get rid of some legacy by
removing the check if HAVE_AUTOCONF is set.
Signed-off-by: Axel Heider <axelheider@gmx.de>
All the kernel header files now use pargma once rather than the ifndef,
as the pre-processed C files do not change while header files
are protected with pargma once. This will also solve any naming issues
caused by ifndef.
This commit also converts our own copyright headers to directly use
SPDX, but leaves all other copyright header intact, only adding the
SPDX ident. As far as possible this commit also merges multiple
Data61 copyright statements/headers into one for consistency.
This removes the assumption that each platform sotres the IPC buffer
address in a platform-specific register. The IPC buffer address is
instead stored in a thread-local variable in libsel4 which must be
initialised by the runtime.
Prior to this change, seL4_MappingFailedLookupLevel() would retrun '22'
after any failed EPT mapping operation. This change fixes this to return
the correct amount of unresolved bits in the address.
Changes the way IO ports work such that instead of 'minting' IO port caps down into new
IO port caps with smaller ranges new IO port ranges must be allocated centrally from
an IO port control cap. This mechanism acts in a very similar fashion as IRQ handler/control
capabilities and ensures that allocated IO ports do not overlap. Disallowing overlapping
IO ports is necessary to ensure the CDT remains valid as capabilities are deleted.
Using the bitfield generator to treat guards and badges as a union type can be convenient,
but it requires reserving a bit in the data for the bitfield run time type information.
This type information is not needed by the kernel as it knows implicitly whether the passed
data is a badge or a guard based on the kind of cap being operated on. However, with the
type information present we cannot pass a word sized piece of data to the kernel.
The solution here is to go back to using a plain seL4_Word as the type for invocations
that want a capdata and let the user either construct a badge as a plain word, or use
the seL4_CNode_CapData bitfield for constructing a guard, although they have to manually extract
the word representation out of it.
Nested structs with attributes are not understandable by the C parser. This change simply
moves the nested definitions into the global namespace (with suitable names).
CONFIG_LIB_SEL4_PUBLIC_SYMBOLS=y will disable inlining for external
interfaces (except deprecated functions), thereby providing public
symbols for easy linkage with other languages.
This is a *breaking API change*
This commit:
* makes seL4_Fault_tag_t common between the kernel and libsel4
* deprecates the existing functions from sel4/messages.h includes
* introduces a new fault API in sel4/faults.h and
* sel4/sel4_arch/faults.h
* deprecates seL4_GetTag(), as the function did not work without
the user calling seL4_SetTag() first (seL4_MessageInfo is passed
in registers and not set in the IPC buffer)
* removes previously deprecated functions (deprecated prior to 3.0.0)
* updates the seL4 manual to reflect the changes
Prior to this commit faults were separate
per architecture. This commit extracts the common
fault types and introduces arch specific faults,
reducing code duplication across architectures.
This commit implements the body of SELFOUR-499. The API exposes the x86 DR0-7
and ARM coprocessor 14 features to userspace by virtualizing them as context-
switched registers in the TCB. Implemented as TCB invocations. This feature is
only built when CONFIG_HARDWARE_DEBUG_API is selected.
* Add low-level support routines for setting, unsetting, getting, enabling
and disabling breakpoints.
* Add support for single-stepping as well.
^ Single-stepping is not supported on ARMv6 since the hardware
doesn't have support.
^ ARM implements single-stepping as instruction breakpoints
configured to fault on every instruction -- this is achieved through
the "mismatch" mode, which is only supported from ARMv7 onwards.
* Also support explicit software break requests, a la "BKPT" and "INT $3".
* New invocations:
* seL4_TCB_SetBreakpoint().
* seL4_TCB_GetBreakpoint().
* seL4_TCB_UnsetBreakpoint().
* seL4_TCB_ConfigureSingleStepping().
* New constants:
^ Event types:
^ seL4_InstructionBreakpoint.
^ seL4_DataBreakpoint.
^ seL4_SoftwareBreakRequest.
^ Access types:
^ seL4_BreakOnRead.
^ seL4_BreakOnWrite.
^ seL4_BreakOnReadWrite.
^ Exports:
^ seL4_NumHWBreakpoints.
^ seL4_NumExclusiveBreakpoints.
^ seL4_NumExclusiveWatchpoints.
^ seL4_NumDualFunctionMonitors.
^ seL4_FirstBreakpoint.
^ seL4_FirstWatchpoint.
^ seL4_FirstDualFunctionMonitor.
See documentation in the seL4 API manual.
Rename all functions, constants and types in libsel4 that are in the
general x86 architecture to have an X86 name instead of an IA32 name.
As libsel4 and the kernel share names this requires changing those
in the kernel as well.
All the original IA32 names can still be used for the moment, but are
marked as deprecated.
Restructure the x86 interrupt handling to allow for a more flexible
method of using IOAPIC and MSI interrupts. The essence of this change
is to allow for the user to pick, for both IOAPIC and MSIs, which
CPU vector to use. Additionally there is future support, in the API,
for seL4 to eventually protect MSI interrupts with the vt-d interrupt
routing tables.
API behaviour for legacy systems using the PIC is preserved
Part of SELFOUR-281
Guarding code with #ifdef's makes even cursor testing of 'does this code compile'
difficult due to code being hidden by the pre-processor. Using config_set in
regular C if statements is performant as the compiler can trivially detect
dead code at compile time, and at -O1 and above will not even link in symbols
referenced by dead code in these blocks, so this will not bloat image size
Guarding code with #ifdef's makes even cursor testing of 'does this code compile'
difficult due to code being hidden by the pre-processor. Using config_set in
regular C if statements is performant as the compiler can trivially detect
dead code at compile time, and at -O1 and above will not even link in symbols
referenced by dead code in these blocks, so this will not bloat image size
This commit deprecates seL4_ReplyWait, removes seL4_NBwait completely,
and changes the return type of seL4_Wait to void (seL4_Wait should be
used for notification objects, and seL4_Recv should be used where
seL4_Wait was used previously for endpoints).
