1ba7b38cfc
The Yuncore 1200F is an outdoor 802.11ac access point based on the MediaTek MT7628AN SoC with an MT7663E PCIe 5 GHz radio. The device is also sold under the KuWFi AP1200F name. Hardware: - SoC: MediaTek MT7628AN - CPU: MIPS 24KEc - RAM: 64 MiB - Flash: 8 MiB SPI NOR - Ethernet: 2x 10/100 Mbps - WiFi 2.4 GHz: MT7628AN WMAC - WiFi 5 GHz: MT7663E PCIe - LEDs: status, LAN, WAN - Button: reset - Watchdog: GPIO watchdog MAC addresses: - Ethernet: factory 0x0004 - 2.4 GHz WiFi: factory 0x0028 - 5 GHz WiFi: factory 0x8004 Network: - LAN: eth0.1, switch port 4 - WAN: eth0.2, switch port 3 Installation: - Build the sysupgrade image: openwrt-ramips-mt76x8-yuncore_1200f-squashfs-sysupgrade.bin - The stock firmware provides a U-Boot recovery web interface. It can be entered by holding the reset button while powering on the device. Connect to http://192.168.0.100/ and upload openwrt-sysupgrade.bin file. Recovery: - Reverting to stock firmware has not been tested. The 5 GHz radio is detected as PCI ID 14c3:7663 and uses mt7615e together with the MT7663 AP firmware. kmod-mt76x2 is explicitly excluded because this board uses MT7663E, not MT76x2. Tested: - Build succeeds for ramips/mt76x8 - Sysupgrade image boots - Ethernet LAN/WAN work - 2.4 GHz AP starts on phy0 - 5 GHz AP starts on phy1 - Stable MAC addresses are assigned to Ethernet, phy0 and phy1 Signed-off-by: Gunther Stammwitz <gstammw@gmx.net> Link: https://github.com/openwrt/openwrt/pull/23613 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> |
||
|---|---|---|
| .. | ||
| base-files | ||
| config-6.18 | ||
| target.mk | ||